How exam assignments are assessed. Converting exam scores in mathematics. Maximum Unified State Examination score in Russian

Below is a scale for converting primary scores of the profile Unified State Examination in mathematics in 2019:

• The initial score obtained is transferred to the test score. Each task in the test part is worth 1 point. Writing tasks - from 2 to 4 points
• To pass the threshold on the profile Unified State Exam, you need to solve at least 6 problems, that is, score 6 primary or 27 test points.

Moreover, you can notice that the first part is very “expensive” in terms of points; for one task in the first part you can get 1 raw point, which is recoded into 5 or 6 test points!

• If you solve all the problems in the first part correctly, you can type 62 points.
• If you solve the entire first part, numbers 13, 15 and 17 (most often these are the numbers that are solved by those who have a solid “5” in school), then you can dial 80 points.

Download the “Unified State Exam in Mathematics” CHECKLIST for free! Preparation algorithm, literature, useful links, Unified State Exam score scale.

• Further points can be taken in geometry (No. 14, 16), parameters (No. 18) or number theory (No. 19). If you solved, for example, No. 14, took a couple of points on No. 19, solving a) and b) - this is already 88 points.
• So to dial above 80 points you need to be able to solve problems on at least one of these topics or several:

- options,

- planimetry,

- stereometry,

For example, you solved 12 problems, but made a mistake in one, as a result you get 11 primary and 56 test points, but could get 62 points (!), if they hadn’t made a mistake in some number, it could have even been the simplest number 1. If you make a mistake again, you will get 50 points for the first part. A point for the simplest task No. 1 “weighs” the same as one point for complex planimetry No. 16; the computer doesn’t care where you scored it. The main strategy is to be careful in the first part.

Examination plan for the Unified State Examination in mathematics

The duration of the work is 3 hours 55 minutes. If you plan to complete tasks of a high level of complexity numbered 18-19, then the first part No. 1-12 should take you no more than 30 minutes.

Good luck to everyone on the exam!

How many points are given for each Unified State Examination task in chemistry? Criteria Unified State Examination assessment in chemistry 2020: points and grades, conversion table, as well as the structure of the exam, testing methodology and main changes in the new year. In 2020, tasks for the Unified State Exam in chemistry began to contain large quantity mathematical elements, calculations physical quantities, the testing of the basic theoretical course of chemistry also became deeper. At the same time, the number of tasks has decreased, now instead of 40 questions, the student will have to solve 35 (according to other sources, 34). Accordingly, the rating scale has changed; for the Unified State Examination in Chemistry 2020, the primary score has become lower - by 4 units.

All assignments are graded differently complex tasks You can earn up to 5 points. Therefore, to enter specialized universities, it is necessary to study the subject as deeply as possible.

Table of criteria for assessing USE 2020 tasks in chemistry, taking into account the new requirements:

Job number	Maximum score
35	3

Assessment of tasks is carried out according to an established methodology, while for complex tasks where logic is required, points are assigned using special analytical tables. If the answer best meets the requirements of the analysis, you can get up to 5 points for it. If the student has only partially developed the topic, the number of points is reduced. For an uncompleted task, 0 points are awarded.

Complex assignments are checked by two experts. If there is a strong discrepancy in scores, then a third specialist is involved. This ensures the most effective and objective assessment of graduates’ knowledge.

Conversion table for the Unified State Exam 2020 in chemistry from points to grades:

Number of points	Grade

The structure of the Unified State Examination tasks in chemistry in 2020 includes 29 questions with a short answer, as well as 5 with an extended answer.

The duration of the exam is 210 minutes; according to the standard, simple questions should take about 3 minutes, complex ones - up to 15. As for the minimum score for admission to specialized universities, each higher educational institution sets its own requirements. For example, for admission to the Faculty of Chemistry of Moscow State University, or the prestigious Moscow medical university You must score at least 50 points.

But usually the overall passing score for prestigious universities is 400-470 (at least less for the chemistry department, more for the medical department), and admission to Moscow State University does not depend on chemistry alone, so if you don’t have enough points, you can get in mathematics, biology, Russian and internal entrance exams.

Significant changes in the Unified State Exam are also observed in other subjects.

To successfully pass chemistry, it is recommended to spend most of your time solving problems and equations. During the test, you can use a calculator, periodic table and salt solubility. The electrochemical voltage series of metals is also allowed.

The evaluation criteria for the Unified State Exam in Chemistry 2020 are described quite clearly in the regulations, but each graduate has the right to appeal.

Table of conversion of points to OGE-2020 grades in chemistry

Graduates of 9th grade have their own assessment criteria. According to all KIM and GIA, the maximum you can score is 34 points. But if a graduate wants to go to a medical college, a specialized class, or some other specialized secondary education related to chemistry, pharmacy and medicine, he needs to score 23 points or higher.

Chemistry score conversion table for OGE-2020

Despite its apparent simplicity, scoring 9 points for the minimum passing grade is not so easy. You need to be able to solve problems, navigate formulas, and have at least a minimal knowledge of theory. Those who pass with a bad mark will remain for the second year if they fail the retake.

Scoring table for assignments:

Job number
	2 (1 – if partially resolved)
	2 (1 – if partially resolved)
	2 (1 – if 2/3 correct)
	2 (1 – if 2/3 correct)

Many schoolchildren, to be on the safe side, start solving difficult tasks right away. If you solve them all without errors, you can score 19 points at once, that is, a “four”. However, this implies a complete solution to the task, otherwise it will be scored 1 point, or even not at all.

The assessment criteria for chemistry tests change every year, the rules become stricter, because there is an idea among the government that there is not enough quality education. This, of course, has no basis, because schoolchildren study worse not because of the program, but mostly because of overload.

What will go into the certificate? What to do if the Unified State Examination in chemistry is written as a bad mark?

If the Unified State Exam in chemistry is not passed, but the grades in mathematics and Russian are normal, the student will simply be given a certificate. And they will also give you a Unified State Exam certificate, where chemistry simply won’t be included. However, the exam can be retaken after a year. There is only one minus here - the overall score may not be enough for admission, and if the university requires chemistry without fail, then they will not accept documents at all. Accordingly, the student loses time, and young men may even be drafted into the army, after which it will be even more difficult to retake the test.

If the grade for the year is 4 or 5, and the Unified State Exam in Chemistry is passed with a 3 or 4 (that is, a decrease in the score), what will go into the certificate? The one year mark will be reached. If the Unified State Exam is passed with a 5, and in a year 3, then it also does not affect the certificate. But every specific school where they are required to calculate the arithmetic mean.

Why is this happening? Because no one checks this calculation later. Based on this, it is better to resolve the issue in advance with the chemistry teacher and class teacher; usually in normal schools, teachers try to meet the graduates halfway. If a child has a 4, but he pushed himself and passed the Unified State Exam with a 5, why not help him?

But! We must remember that no one needs grades on the admission certificate, especially in chemistry. Today in 99% of cases they look only at the Unified State Examination certificate. Tags:

What is the Unified State Exam in mathematics - points, tasks, percentage of completion...

From the beginning of the 10th grade (immediately after the end of the Unified State Examination), everyone is frightened by the upcoming final exams and gradually begins to be given scattered assignments. By the 11th grade, the picture of tasks develops into a single option, but what knowledge will we need for which task? How to prepare? Let's talk about this.

Let's start with statistics on task completion in 2017:

Only a few percent of students completed the 13th and subsequent tasks: 12.9% of those who took the test received 1 primary score, and 36.3% received 2 points. Similarly with other tasks from the second part.

The entire Unified State Exam in mathematics is divided into 3 topics:

There is a primary score and a final score, the conversion schedule is presented below.

The primary score is the preliminary USE score, which is obtained by simply summing the number of correct answers. In the first part, for each of the 12 tasks you can get 1 primary point. In part two, tasks are more expensive:

In total, for all Unified State Examinations in mathematics you can get 12+2+2+2+3+3+4+4 = 32 primary points.

Final (test) score- this is the conversion of the primary score to the hundred-point system. Moreover, the points are distributed unevenly.

The exam in specialized mathematics is the only Unified State Exam where you can get 100 final points, while losing 2 primary points.

As can be seen from the graph from 0 to 13 primary points, one primary point costs approximately 5 final points. Further points are more difficult to obtain: each primary point brings only 2 final points.

There's no difference, if you correctly solved the first 12 tasks or 8 in the first part, the 13th and 15th, you will still have 12 initial points and 62 final points.

The average score for specialized mathematics in 2017 was 47 points.

For the entire first part, correctly completed, you can get 62 points, but, based on statistics, few people succeed in this. Many teachers, especially from physics and mathematics lyceums, say that the first 12 tasks need to be solved in 45-50 minutes. This is true if you want to score 100 and can solve all the problems. But if you are counting on solving tasks 13, 15, 17, then you should spend twice as much time on the first part in order to avoid stupid mistakes and check it as thoroughly as possible, every point counts. Behind one wrong task in the first part you lose from two to six final points.

p.s. In 2016, I took the Unified State Exam and, due to inattention, did the 12th task incorrectly, the total was 94 points, instead of 96.

• Clearly define the minimum number of points you need ("the more the better" will not work).

• Make a list of tasks that are easiest for you to solve in order to score the required minimum.

• Bring this minimum so that 90% are consistently solved correctly (for many this is No. 1-13, No. 15 and No. 17).

• Start solving the problem "in reserve". For example, No. 14 or the first points of No. 19. Nobody knows which task will be unusual (difficult) this year. In the early exam in 2017, this was problem 17. On the main one it was 14. Perhaps the task you were preparing would turn out to be overwhelming.

• Solve difficult tasks. Statistics show that those who solved more complex options coped better with the Unified State Exam (at the same level). For example, options Larina or Chupro. This is explained by the fact that you will solve tasks that are easier with a higher percentage correctly. Also, every year at the Unified State Exam they give tasks that are not similar to previous years and have only distant analogues. By solving more complex tasks, you will learn to think, which will significantly help you not to get stunned at the sight of an “unknown” task. Books "30 Options" are usually easier than real tasks on the Unified State Exam. The site "Solve the Unified State Exam" is most similar to the real Unified State Exam.

• Try to arrange an exam for yourself by solving the 4-hour version of the Unified State Exam.

• And of course, right.

Secondary general education

Line UMK G. Ya. Myakisheva, M.A. Petrova. Physics (10-11) (B)

Unified State Exam 2020 in Physics: scale for transferring points and evaluation criteria

Physics for the Unified State Exam 2020 is an elective exam, it is assumed that the graduate is going to continue his studies in a technical direction and the minimum basics of the discipline are familiar to him. Having solid basic knowledge in your reserve, you can successfully score above average, and by starting your preparation on time, you can get a high score.

We have a new format! You can now listen to the article

Almost 4 hours (235 minutes) are given to complete all tasks.

Points conversion table

Physics exam scores are converted into the corresponding marks:

The physics points for the Unified State Exam 2020 are distributed as follows:

Physics in formulas. 7–11 grades. Reference Guide

The reference manual contains more than 60 summary tables for all sections school course physics. This manual is intended for the formation of holistic ideas about the physical and natural-scientific picture of the world. The manual is addressed to students in grades 7–11, applicants and teachers.

Unified State Examination 2019 score conversion scale, physics

Minimum test score The Unified State Exam in Physics is 36 points, the minimum primary Unified State Exam score is 11 points.

Primary score	Secondary (test) score

The examination paper consists of tasks of different difficulty levels:

• elevated,

1) The basic level of difficulty includes tasks in the 1st part of the work (19 tasks with a short answer: 13 of them need to be answered in the form of one or two numbers or a word, 6 tasks have an answer in the form of a sequence of numbers). A basic level of Difficulties have fairly simple tasks that test the assimilation of the most important physical concepts, models, phenomena and laws, as well as knowledge about the properties of space objects.

2) K increased level Difficulties include tasks from the 1st and 2nd parts of the work:

5 tasks have a short answer (part 1),

3 tasks - also a short answer, but in part 2,

1 task with a detailed answer (part 2).

Tasks aimed at testing the ability to use concepts and laws of physics to analyze various processes and phenomena, as well as the ability to solve problems on the application of one or two laws (formulas) on any of the topics of the school physics course, have an increased level of complexity.

3) The high level of complexity includes 4 tasks from part 2, testing the ability to use the laws and theories of physics in a changed or new situation. Students with a high level of preparation can cope with these tasks. The presence of tasks of this level in the examination paper makes it possible to differentiate graduates when selecting for universities with different requirements for the level of training.

Long answer assessment criteria

The solution to tasks 28–32 of the second part of the examination paper (detailed answer) is checked and assessed by experts. Based on the FIPI criteria, for completing each task, depending on the prevalence and correctness of the answer given by the examinee, from 0 to 3 points are awarded.

The maximum primary score for a task with a detailed answer is 3. “For each task there is a detailed instructions for experts, which indicates what each point is awarded for - from zero to the maximum point. In the exam version, before each type of task, instructions are given that provide general requirements for the preparation of answers.”

To understand what the answer to tasks with a detailed answer should look like, you need to study the information on the assessment criteria on the official FIPI website. Having selected the section “USE and GVE-11”, you should refer to the item “Demo versions, specifications, codifiers”. Next, you need to select a subject and study all the rules and subtleties of conducting and assessing the exam.

This manual includes tests for self-control, independent work, test papers. The proposed didactic materials are compiled in full accordance with the structure and methodology of V.A.’s textbooks. Kasyanov “Physics. A basic level of. 11th grade" and "Physics. Advanced level. Grade 11".

For example, this is what the assessment of task 28 looks like:

3 points

a complete correct solution is given, including the correct answer (in this case: the occurrence of an induction current in coil B and its direction) and comprehensive correct reasoning with a direct indication of the observed phenomena and laws;

2 points

The correct answer and explanation is given, but the solution has one or more of the following flaws:

the explanation does not indicate or does not use one of physical phenomena, properties, definitions or one of the laws (formulas) necessary for a complete correct explanation. (The statement underlying the explanation is not supported by the corresponding law, property, phenomenon, definition, etc.);

all the phenomena and laws and patterns necessary to explain are indicated, but they contain one logical flaw;

the decision contains extra entries that are not included in the decision, which are not separated from the decision or crossed out;

the solution contains an inaccuracy in indicating one of the physical phenomena, properties, definitions, laws (formulas) necessary for a complete correct explanation;

1 point

A solution corresponding to one of the following cases is given:

the correct answer to the task question is given and an explanation is given, but it does not indicate two phenomena or physical laws necessary for a complete correct explanation;

all the phenomena and laws and patterns necessary to explain are indicated, but the existing reasoning aimed at obtaining an answer to the question of the assignment is not completed;

all the phenomena and laws and patterns necessary to explain are indicated, but the existing reasoning leading to the answer contains an error(s);

not all phenomena and laws and patterns necessary to explain are indicated, but there are correct reasoning aimed at solving the problem;

0 points

All cases of solution that do not meet the above criteria for scoring 1, 2, 3 points.

The Unified Exam implements a nationwide knowledge competition. The smartest people get the maximum points and 100 points. To evaluate all other exam participants, theories were built, graphs and distributions were drawn. This is a very fruitful and interesting topic.

This section will cover scaling, theoretical basis assessments in the Unified State Examination. All information is presented in an accessible form, and tabular data is taken from official websites. We apologize in advance for the fact that the inserted pictures and materials sometimes contain errors from the original source; we will not correct them, respecting the copyright and other rights of the original sources.

We will pay the greatest attention practical advice and recommendations. The exam can be passed with a score higher than “an average student with this level of knowledge.” “How to do this?”, “Why will these techniques work?” - you will see this for yourself.

Scaling

When conducting the Unified State Exam, many graduates from different educational institutions. They have completely different levels of training: from Olympiad winners to “C” students. In this regard, the question arises: how to objectively assess and, most importantly, compare the level of their preparedness, since all graduates have equal rights when passing final exams and when entering a university or secondary school?

Scaling is a procedure for converting primary scores into test scores.

It is necessary to understand the difference between the concepts of “primary score” and “test score”.

The primary score is the preliminary USE score, which is obtained by directly summing the number of correct answers, each of which has a certain coefficient. Primary score for different items, usually different. For example, in mathematics it is 30, and in Russian - 64

A test score is the final score that a Unified State Examination participant receives based on the exam results. Maximum test score for to all subjects - 100.

Each completed USE task is assessed with a number of points from 1 to 6. The sum of these points constitutes the primary score of the examination paper.

Here is a table in which you will see how many primary points are awarded and for what tasks:

Next, a correspondence is established between the primary and test scores. The scale for converting primary scores into test scores is constructed using a special technique, taking into account the properties of control measuring materials in subjects.

Obviously, this scale preserves the ordering of individual results, that is, a larger primary score will correspond to a larger test score, and equal primary scores will correspond to equal test scores.

A feature of the translation scale is that the change in test score when the primary score changes depends on total primary points. This change will be slightly larger if the participant received either a small primary score or, conversely, a fairly high one. Moreover, the boundaries of the intervals at which these differences appear are published in advance in the specified methodology. Within the intervals themselves, the change in the test score when the primary one changes will be almost constant (fluctuations of 1 point can only occur due to the fact that the number of test scores in the interval is not a multiple of the number of primary ones).

It is important to remember that the test score is NOT the percentage of tasks completed correctly.

Here is a table of the correspondence between the primary and test scores on the Unified State Exam according to mathematics 2011:

Primary score	Test score, 2011	Number of students
		people	%	accumulated %
0	0	2 894	0.4	0.4
1	6	7 787	1.1	1.4
2	12	14 052	1.9	3.3
3	18	20 916	2.8	6.2
4	24	29 328	4.0	10.1
5	30	39 723	5.4	15.5
6	34	49 641	6.7	22.2
7	38	56 714	7.7	29.9
8	41	62 099	8.4	38.3
9	45	65 158	8.8	47.1
10	49	66 817	9.0	56.2
11	52	66 308	9.0	65.2
12	56	61 565	8.3	73.5
13	60	50 316	6.8	80.3
14	63	40 441	5.5	85.8
15	66	28 186	3.8	89.6
16	68	20 654	2.8	92.4
17	70	15 812	2.1	94.5
18	73	10 400	1.4	95.9
19	75	8 340	1.1	97.1
20	77	5 638	0.8	97.8
21	80	4 397	0.6	98.4
22	82	3 247	0.4	98.9
23	84	2 462	0.3	99.2
24	87	1 861	0.3	99.5
25	89	1 399	0.2	99.6
26	91	977	0.1	99.8
27	94	737	0.1	99.9
28	96	401	0.1	99.9
29	98	271	0.0	100.0
30	100	205	0.0	100.0
		738 746

This table also shows the number and percentage of students who scored a certain test score.