How to connect a digital voltmeter to a car. Installing a voltmeter in a car. What to look for when choosing

The procedure for replacing the air filter is one of the simplest operations in the list of car service jobs. In the article we will talk not only about choosing a filter element, but also show in detail how to change the filter yourself on a Renault Sandero 1.6 liter in 8-valve and 16-valve modifications.

How often should I replace it?

According to the manufacturer's recommendations, replacement is carried out every 15 thousand km or once a year, regardless of mileage. If the car is often driven in regions with big amount dusty, gravel roads; for a long engine life, it is advisable to reduce the replacement period to 10 thousand km. Also, the filter must be replaced if it is damaged in any way during the car repair process.

Once inside the motor, dust, sand and other dirt particles turn into an abrasive, accelerating the wear of rubbing pairs. A contaminated filter element is reflected in the vehicle's performance by increased fuel consumption and loss of dynamic characteristics.

Air filter selection

The filter element should be selected from the catalog, since its shape in the case of Renault Sandero depends not only on the engine modification, but also on the design of the cylinder head and the year of manufacture.

• 8-valve 1.6 with an oval body shape, as well as 1.4. A round filter element is installed. Original catalog number – 7701070525;
• 16-valve 1.6, as well as 8-valve 1.6 from 2012. A rectangular filter element with number 165469466R is installed;
• 1.2 l (installed on Sandero II). Catalog number – 165461599R;
• 1.5 Dci (Sandero II). Original number – 165467674R;
• 1.6 H4M (Sandero II). A rectangular element with a beveled corner on one side. Number – 165460509R.

Buy an original product to replace it or choose among many good substitutes – it’s up to you. We can say from ourselves that the quality of filter elements from Bosh, Mann, Wix, Mahle will be no worse than that of filters from the original brand.

Replacing the air filter Renault Sandero 1.6 (8-valve)

Rectangular body

Since 2012, a rectangular filter has been installed on 8-valve engines. The shape of the body also changed from oval to rectangular.

1. Using a size 8 wrench, unscrew the 2 fastening bolts in the front part of the housing.
2. Unclip the two spring latches on the sides.
3. Remove the two Torx screws at the top of the filter housing mount.
4. To release the housing, pull it towards you.
5. Replace the air filter and reassemble all elements in the reverse order of removal. Make sure that the sealing rubber is pressed tightly around the entire perimeter of the case.

[yt=8xADkMm9zYQ]

Renault Sandero with 16-valve 1.6

Replacing the Renault Sandero air filter with your own hands on a 16-valve 1.6 is no more complicated than the procedure described above.

Sandero II H4M 113 hp

By replacing the air filter on Renault Sandero yourself, you will be sure that clean air is entering the engine. Fortunately, even a novice car enthusiast can handle the replacement on a Sandero II with an H4M engine.

The air filter is located behind the battery. To replace, simply unclip the 2 latches and pull the upper part of the housing towards you. After installing the new paper element, the insert must be inserted into seat until the latches characteristically snap into place.

Sandero II diesel

The air filter on Renault Sandero with 1.5 DCI is changed in the same way as on the H4M gasoline engine. It is enough to unscrew the two latches, replace the element and install the insert back into the body until the latches snap into place.

[yt=AOJdDSNXA24]